Vacuum tank trailers
Solid solution
Vacuum tank trailers are not only easy to operate, but also convince by a long service life and an excellent price-performance ratio.
The features at a glance:
- Single-axle to four-axle slurry tankers
- Tank sizes of 6 m³ to 32 m³
- Steel tanks from German quality production
How it works
The vacuum tank trailer works with vacuum and overpressure. If a tank is to be filled, a vacuum compressor generates a vacuum. Thus, the slurry flows into the barrel. During discharge, the compressor generates an overpressure, which actively conveys the slurry to the application technology.
Basic Equipment
Always firmly connected
Whether top or bottom hitching, with or without drawbar suspension – we have the right hitch for every tractor and every system. To make your work even more efficient, we adapt the hitch of your slurry tanker individually to the existing tractor and to the permissible drawbar load.
Rigid top hitch
- for flange towing eye or K80 ball
- suitable for slurry tankers without or with light spreading technology
Rigid bottom hitch
- for K80 ball
- high driving comfort and ease of towing
- higher drawbar loads can be achieved
Bottom hitch with drawbar suspension
for K80 ball
Highest driving comfort
Adjustable to different coupling heights
Slope of the slurry tanker adjustable
Individuality right from the start
Individuality is important to us right from the start. For this reason, we customise all containers to the respective chassis and the desired tyre size.
Our containers are manufactured in a special low-profile design and thus offer you optimum driving comfort – both on the road and in the field.
Every garant container offers reliable corrosion protection. You can choose between galvanising or a special internal coating in combination with a coloured exterior paint.
Tyres are not just tyres
Tyre type, tread and size must be perfectly adapted to the usage. We have the right tyre for all operating conditions and any type of soil available. We exclusively rely on renowned manufacturers such as Vredestein or Trelleborg.
The features at a glance:
- Radial and cross-ply tyres
- Diameter from 22.5 to 42 inch
- Widths between 385 and 1050 mm
Proven and reliable
In order to ensure a high degree of reliability, we exclusively use original BPW axle assemblies. All BPW chassis are individually adapted to your vehicle to guarantee optimum driving safety. In doing so, we take the gross vehicle weight rating, the tyres and the application into consideration.
Technical features of our chassis:
- Square axle up to 150 mm x 150 mm
- Brake drum up to 410 x 180 mm
- TÜV certification up to 60 km/h
- Prepared for tyre pressure control systems
The chassis at a glance
Einachs-Aggregat | Extrem belastbar. Geeignet für Einachs-Güllewagen |
Verbundaggregat mit Parabelfederung | Sehr gute Hangstabilität. Geeignet für Tandem- und Tridem-Güllewagen |
Boogie-Achs-Aggregat mit Parabelfederung | Gute Federeigenschaften. Geeignet für Tandem-Güllewagen |
Pneumatisch gefederted Aggregat | Hohe Fahrstabilität & Komfort. Geeignet für Tandem-, Tridem- und Vierachs-Güllewagen |
Hydraulisch gefedertes Aggregat | Sicherheit in Hanglagen. Geeignet für Tandem-, Tridem- und Vierachs-Güllewagen |
Verschiebbare Achse | Flexibilität bei verschiedenen Applikationstechniken. Geeignet für Tandem-Güllewagen |
Triebachse | Hydraulisch angetrieben. Geeignet für Einachs-, Tandem- und Tridem-Güllewagen |
Proven and reliable
Compressors do not come into contact with the slurry during filling and emptying, therefore there is only little wear.
Furthermore, service work can be carried out easily and cost-effectively. We exclusively equip our vehicles with quality compressors from Jurop.
PN compressors
- Vacuum rotary compressor with segments
- Air performance from 9,000 to 15,200 litres per minute
- Insensitive to liquid foreign substances
- Easy maintenance
DL compressors
- Lobe compressor with counter-rotating pistons
- Air performance from 10,000 to 17,600 litres per minute
- Oil-free operation
- Suitable for continuous operation
- Low noise level
Intelligent steering and fuel-saving
Steering axles improve manoeuvrability and track accuracy, which considerably reduces tyre wear and the load exerted on the entire chassis. Furthermore, you save fuel by means of a steering axle due to the fact that the slurry tanker is significantly easier to pull. Less friction additionally protects the ground and the sward.
Hydraulic forced steering
- Straightforward and robust system
- Large steering angle possible
Electro-hydraulic forced steering
- ElectronicSteeringSystem (ESS 2.0)
- Simple connection, as no steering linkage is required
- Manual steering possible via control unit
Electro-hydraulic steering system
- MultiSteeringSystem (MSS)
- All axles are steerable
- Adjustable steering strategies, e.g. also travelling in crab-steering mode
Supplementary Equipment
Significantly more efficient filling
Filling aids help you fill your vacuum slurry tanker much more efficiently. They not only save time, but also achieve a significantly higher degree of filling in addition to creating a vacuum effect.
Another advantage is the low foam produced in pig manure. When handling cattle manure you avoid the vacuum-induced increase in volume. This means that the filling aid also protects the vacuum compressoror.
Exactly determine quantities
An inductive flow rate sensor continuously determines the quantity of discharged slurry within a measuring range between 0.5 and 12 cubic metres per minute.
The current quantity (m³/ha) is calculated on the basis of the recorded travelling speed in combination with the saved operating width of the application technology. You can read off the current value from a digital display at any time. The discharge quantity can also be actively controlled on request.
Powerful lifting and lowering
Our durable and robust garant three-point/four-point lifting gears are the basis for your work success.
Our lifting gears at a glance
Unsere Hubwerke im Überblick
| Vierpunktanhängung L | Vierpunktanhängung XL | Vierpunktanhängung XXL | Vierpunktanhängung HD | |
|---|---|---|---|---|
| Max. Anhängelast | 2 t | 3 t | 4 t | 4 t |
| Hubkraft | 4 t | 8 t | 8 t | 8 t |
| Geeignet für... |
|
|
|
|
Bedarfsgerechte Stickstoffversorgung
Vor allem auf leichten Böden erhöhen Nitrifikationshemmer die Effizienz von Flüssigmist. Denn durch ihren Einsatz verhindern Sie, dass der für die Pflanzen unmittelbar verfügbare Ammoniumstickstoff ausgewaschen wird.
Eine Dosieranlage für Nitrifikationshemmer bietet zahlreiche Vorteile. Dank des Vorratstanks müssen Sie nicht ständig nachtanken. Zudem können Sie die Soll-Menge pro Hektar exakt dosieren – und zwar weitgehend automatisch.
Tongue load in all situations
Our two-chamber system helps you to optimise the tongue load of the tractor, particularly on slopes. The principle is simple and smart: The interior of the slurry tanker is divided into two chambers. Due to closing the first chamber, there is more slurry in the front chamber than in the rear one during discharge. This means that the tractor still has sufficient tongue load, particularly when travelling uphill.
Working three times more efficiently
Lower the tyre pressure on the field, increase the ground contact area and thus reduce the pressure exerted on the ground. On the other hand, use a higher tyre pressure on the road to reduce the rolling resistance, thus achieving a considerable decrease of the diesel consumption. Moreover, tyre wear is also reduced.
The features at a glance:
- German quality manufacturer PTG
- One- and two-wire systems
- Integrated and separate control terminal solutions
- From 1.5 to 3.5 bar in up to two and a half minutes
More comfortable by far
Our garant suction spout solutions help you to easily, quickly and safely fill your professional slurry tanker. Thus, you stay clean and work comfortably and efficiently at the same time.
Simply suction arm
- A pivot joint
Docking height approx. 1.30 metres
NW 200 or NW 250
Suction arm Multi 3 in 1
- Modular / Flangeable design
- Single-steered version with or without filling aid
- Double-steered version with short or long transfer range
- Double-steered version with suction hose for pit extraction
- NW 200
Suction arm on top of the tank
- Can be swivelled up to 270°
- Telescoping
- Automatic parking position
- NW 200
Prevent clogging and protect technology
The use of a cutting filter prevents the suction of foreign objects and solid materials into the tank, such that the risk of clogging in the distribution head of the application technology is reduced.
A cutting filter chops the foreign objects by means of a star-shaped rotor knife installed at the cutting comb and excels by its straightforward design, easy cleaning and low maintenance requirement.
